Norwood The Grain Handler 8 Operator's Manual page 50

27. Install "Keeper Bolt & Nut" 30 to secure. Do Not over-
tighten.
(See Fig. # 3-26)
You may need to rotate the Power Sweep Assembly ap-
proximately 45° to make sufficient clearance to install the
Keeper Bolt.
Fig. # 3-26 Install Keeper Bolt & Nut To Secure
28. Install the "Standard" or "Buzz Drive Wheel Flighting
Extension"
(See"Install new drive wheel flighting exten-
sion option" on page 3-30)
29. Proceed to the next step.
lation" On Page 3-11)
NOTE
30
(See "Power Sweep Stop Instal-
3 - INSTALLATION
3-10