Norwood The Grain Handler 8 Operator's Manual page 74

MODELS:
8" U Trough Powersweeps
802-42-1104U, 802-48-1104U, 802-54-1104U,
802-60-1105U
10" U Trough Powersweeps
102-42-1104U, 102-48-1104U, 102-54-1104U,
102-60-1105U
Estimated Completion Time: 30 Min's.
Parts:
(See Page # 3-38)
REQUIRED TOOLS / SUPPLIES:
(2) C-Clamps or Equivalent
(1) Pencil or Felt Tip Marker
(1) 3/8" Ratchet
or (1) 3/8" Pneumatic or Battery
Powered Impact Wrench
(1) 13/32" Transfer Punch or
Center Punch
(1) Hammer
(1) Pilot Drill Bit
DANGER
NEVER ENTER BIN UNLESS ALL POWER IS LOCKED
OUT AND ANOTHER PERSON IS PRESENT.
Exposed auger and moving parts can cause severe in-
jury or death. Rotating augers are dangerous! Flowing
grain may trap and suffocate.
FAILURE TO HEED THIS WARNING MAY CAUSE SERI-
OUS INJURY OR DEATH.
3 - INSTALLATION
(1) 1/8" Drill Bit
(1) 13/32" Drill Bit
(1) 3/16" Allen Wrench
(1) 3/8" Socket
(1) 1/2" Socket
(1) 5/8" Socket
(1) Torque wrench
(Several) Wood Blocks
(Several) Wood Shims
ROTATING AUGER HAZARD KEEP AWAY
To prevent serious injury or death from rotating au-
gers:
1. Do not enter bin unless power is locked out.
2. Turn machine OFF, shut down and lock out power
source, unplug power cord and wait for all moving parts
to stop before inspecting, servicing or repairing machine.
3. Keep body, hair, and clothing away from moving parts.
4. Stay away from rotating augers. Keep others away.
FAILURE TO HEED THIS WARNING MAY CAUSE
SERIOUS INJURY OR DEATH.
The following instructions are for installing the "Carrier
Wheel" accessory for "Power Sweep" sweep augers lengths
of 42' 48' 54' & 60'. To install the Carrier Wheel", proceed
as follows.
SERVICE PROCEDURE:
Preparation:
1. First inspect the contents of the box and inventory all
parts before proceeding with the installation.
for a complete parts listing)
# 3-38)
2. The grain bin must be completely empty of grain before
installation.
3. Determine the installation location by measuring end to
end of the sweep auger.
Length Divided By 2
To Find Center
Fig. # 3-82 Determining Installation Location
3-34
DANGER
(See Fig. # 2-33)
(See Page