Tektronix DG2040 User Manual page 95

Reference
3 12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table 3 3: Import parameters (Cont.)
Parameter Function
Convert to Bin When this setting is set to ON, the waveform is compared to a
threshold level and the data is converted to binary. RP binary data from
the Tektronix TDS and TLS series products are read in as RI data. The
data cannot be converted to binary data if it is left in the RP state.
Threshold Sets the threshold level used to convert read in data to binary when the
Convert to Bin parameter is set to ON.
With Marker Data Sets whether or not marker data is read, in addition to waveform data,
for Tektronix AWG2000 series waveform file format data.
Figures 3-7 and 3-8 show the data write operations in terms of point positions
and data bit positions when pattern memory is the write destination.
Start Position
(Source Start)
Read in Data
Pattern Memory
Initial position where
data is written
(Dest Start)
Figure 3 7: Data write in terms of point positions
Number of data
points read
(Read Points)
Read in Method
(Read type:Overwrite)
DG2040 Data Generator