Table of Contents
Advertisement
Rename Current Block
Resize Current Block
DG2040 Data Generator
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The Rename current block item in the pop-up menu changes the name of the
block at the current cursor position.
Operation.
Do the following to change a block name.
Bottom button
Pop up menu
Move the knob icon to the Cursor window in the upper left area of the screen.
Move the cursor to the block where the name is to be changed.
Block
Select Rename current block.
Enter the new block name.
The Resize current block item in the pop-up menu changes the size of the block
and the memory size at the current cursor position only.
When increasing the size of the current block, only set a size that does not cause
the total number of points to exceed the maximum memory size. Zero data
corresponding to the increase in size is added at the end of the block.
Data is deleted from the end of the block when the size of the current block is
decreased.
Note that the range of allowable block sizes starts at a minimum size of
360 points.
NOTE. Changing the block size cannot be reversed with the Undo operation.
Before Change a
Block 1
Block Size
After Change a
Block 1
Block Size
Figure 3 21: Change a block size
Current Cursor Position
Block 2
Block 3
Block 2
Block 3
360 Points or Over
Reference
Side button
OK
Clear String
OK
3 31
Advertisement
Table of Contents
