Table of Contents
Advertisement
Appendix B: Performance Verification
Test Procedure Notes
B 4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The following conventions are used in this section for describing the self tests
and performance tests.
H The test items are described in the following order.
H Characteristic tested
H Required equipment
H Connections
H Test procedure
H The test procedure is presented in order starting with step 1, and progresses
through the end of the procedure. Tables such as the one shown below appear
in these steps. For these steps, press the buttons in the order shown in the
table, either from left to right or from top to bottom, to select the required
menu item. For pop-up menus, use the general purpose knob to select items
from the menu list. Operations such as Operation 6 do not involve pressing
the buttons shown in the row above, but rather are descriptions of operations
to be performed. Figure B-1 shows the buttons used and the menu layout.
Menu button
Bottom button
Operation 1
Operation 2
Operation 6 (for example, insert a disk in the disk drive.)
Pop up Menu
Side Menu
Bottom Menu
Bottom Buttons
Figure B 1: Operating buttons and menu layout
Pop up menu
Side button
Operation 3
Operation 4
Operation 7
General Purpose Knob
Side Buttons
Menu Buttons
Front panel
button
Operation 5
Front Panel Buttons
DG2040 Data Generator
Advertisement
Table of Contents
