Tektronix DG2040 User Manual page 165

Reference
3 82
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DATA 1
DATA 0
(a) To specify all rising and falling edges in the DATA0, set the all bits in the DATA1 to 1.
DATA 1
DATA 0
(b) To specify all rising edges in the DATA0, copy the DATA0 pattern to DATA1,
and then shift the DATA1 pattern to right or left.
DATA 1
DATA 0
(c) To specify all falling edges in the DATA0, copy the DATA0 pattern to DATA1.
Figure 3 67: Examples of the edge control bit
The specified edges are highlighted in the EDIT menu.
DG2040 Data Generator