Table of Contents
Advertisement
DG2040 Data Generator
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Side Menu
Item
Function
Set All Registers
Sets the value of all the register bits to 1.
Maximum Length Tap
Sets the taps to positions so that the output becomes a tap M series for
the current register length. There are multiple tap combinations for
M series bit series. Each time the Maximum Length Tap button is
pressed, the tap combination changes.
Region
The values All and Entered can be set. When All is selected, all of the
Dest Bit memory is filled with the pseudo random pulse pattern. When
Entered is selected, the pattern is written to the area specified by the
From and Size parameters.
Operation.
Do the following to set the register value input and taps.
Bottom button
Pop up menu
Enhanced Action
Shift Register Generator
Set the parameters in the pop up menu.
(Register Length, Points/Step, Dest Bit, From, and Size)
Use the general purpose knob to select bits for setting in the register.
Set the value of a bit in the register with the 0 and 1 numeric keys.
Set the tap on/off state for a bit using the -" numeric key.
Reference
Side button
OK
Region (Select All or
Entered)
OK
3 49
Advertisement
Table of Contents
