Table of Contents
Advertisement
Set Numeric View Format
DG2040 Data Generator
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Specify the bit width from 2 to 32, select BIN or HEX from the display/edit
format, and the MSB/LSB position. These settings can be used for numeric view
format. Refer to Table 3-6 on page 3-23 to set view type to numeric. Refer to
page 2-22 for Parallel/Serial editing.
Pop up Menu. Use the general purpose knob or the numeric key to set the bit
width. The value can be set from 2 to 32. Figure 3-16 shows the pop-up menu.
Figure 3 16: Bit Width pop up menu
Operation.
Do the following to set the display format for the numeric view.
Bottom button
Pop up menu
Settings
Select numeric view format
Set the bit width in the pop up menu using the general purpose knob or the numeric keys.
Reference
Side button
Format (Select BIN or
HEX)
First (Select LSB or
MSB)
OK
3 27
Advertisement
Table of Contents
