Tektronix DG2040 User Manual page 60

DG2040 Data Generator
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
3. Set the data bit positions and bit widths by setting the height (scope) and
width of the data that you are going to edit.
Menu button Bottom button
Execute
Action
Move the knob icon to the Cursor window in the upper left area of the screen by
pressing the front panel CURSOR button once or twice.
Move the knob icon to the Width window in the upper left area of the screen by pressing
the front panel CURSOR button once.
Press the down arrow button until the area cursor covers DATA0 to DATA1.
4. Create the binary pattern for a value increasing every 2 clock ticks.
Menu button Bottom button
Execute
Action
The previous steps created the binary pattern shown in Figure 2-22 in
DATA0 to DATA1.
Pop up menu Side button
Set scope OK
2 OK
Pop up menu Side button
Binary up OK
counter
OK
Operating Basics
Front panel
button
0
ENTER
1024
ENTER
Front panel
button
2
ENTER
EXECUTE
2 29