Tektronix DG2040 User Manual page 93

Reference
Save Data & Setup
Import
3 10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The Save Data & Setup functions stores the pattern data, block, group, sequence
and setup data from the instruments internal memory to mass memory (3.5 inch
floppy disk) in the DG2040 Data Generator format.
Submenu
Item Function
Clear String Deletes the current displayed string.
Change Directory Changes the current directory.
Operation
Do the following to save the pattern data and setup parameters:
Bottom button Pop up menu
Insert a write enabled 3.5 inch floppy disk in the floppy disk drive.
File
Enter the file name for the data to be saved.
The Import function loads the pattern data from mass memory (3.5 inch floppy
disk) into pattern memory. The DG2040 can read the following data formats:
H Tektronix TDS series waveform data (file extension: .WFM)
H Tektronix TLS series group data (file extension: .GRP)
H Tektronix AWG2000 series waveform data (file extension: .WFM)
H Tektronix DG2000-Series and DG2040 Data Generator waveform data (file
extension: .PDA)
H CSV format data (file extension: .CSV). Refer to page 3-13 for instructions
regarding formatting data in a CSV format.
Pop-up menu parameter settings are used to specify the read-in method.
Operation
.
Do the following to import pattern data from mass memory.
Bottom button Pop up menu
Insert the 3.5 inch floppy disk in the drive.
File
Select the file to be read in.
Change the parameters as required.
Side button
Save Data & Setup
OK
Side button
Import Data
OK
OK
DG2040 Data Generator