Tektronix DG2040 User Manual page 69

Operating Basics
2 38
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
2. Set the length of pattern memory (the number of samples) to 1440 points.
Menu button Bottom button
Settings
3. Set the block cursor position and width. This procedure sets a scope of 2
(DATA0 and DATA1) and a width of 360 samples.
Menu button Bottom button
Execute
Action
Move the knob icon to the Width window in the upper left area of the screen using the
front panel CURSOR button.
4. Divide the data between block 1 (point 0 to 359) and block 2 (point 360 to
719). Use BK2 as the name for block 2.
Menu button Bottom button
Move the knob icon to the Cursor window in the upper left area of the screen by
pressing the front panel CURSOR button once or twice.
Block
Pop up menu Side button
Set memory OK
size
OK
Pop up menu Side button
Set scope OK
2 OK
Pop up menu Side button
Add block OK
delimiter here
Clear String
BK2 OK
DG2040 Data Generator
Front panel
button
1440
ENTER
Front panel
button
360
ENTER
Front panel
button
360
ENTER