DG2040 Data Generator
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Edge Ctrl d. The EdgeCtrl function sets the edge control to on or off.
Operation.
Do the following to set the edge control to on or off.
Bottom button
Pop up menu
Edge Control
If necessary, go into the EDIT menu by pressing the EDIT button after you have
set the Edge Control to On.
Position Offset . Set the deviation time from the original position. The position
offset can be set from –100 ps to + 100 ps in 5 ps steps.
Operation.
Do the following to set the time.
Bottom button
Pop up menu
Edge Control
Reference
Side button
Edge Ctrl (Select On
or Off)
Side button
Position Offset
(Set the time)
3 83