Tektronix DG2040 User Manual page 141

Reference
Insert
3 58
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
As already stated, a sequence can call subsequences. Each subsequence is
composed of blocked patterns with specified repeat count.
Figure 3-52 shows an example of a subsequence. This subsequence is called by
the sequence shown in Figure 3-52.
Figure 3 52: Make Subsequence menu and a subsequence example
This Make Sequence menu function inserts a new sequence step at the position
of the line pointer. In the Make Sequence menu, block or subsequence can be
inserted in each line. The BLOCK column of the lines inserted with subse-
quences becomes highlight gray to distinguish from those inserted with blocks,
as shown in Figure 3-51.
Operation.
Do the following to insert a sequence step.
Bottom button Pop up menu
Make Sequence
Use the general purpose knob to move the cursor to the line where the step is to be inserted.
Select the block.
Side button
Insert
OK
DG2040 Data Generator