Tektronix DG2040 User Manual page 71

Operating Basics
2 40
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Menu button Bottom button
7. Change the name for block 1 to BK1. Confirm that the knob icon appears in
the Cursor window in the upper left area of the screen. If the icon is not in
that window, move it there with the front-panel CURSOR button.
Menu button Bottom button
Block
8. Create block 1 data by creating a binary up-counter data in block 1. First
make sure that the value of the Cursor window in the upper left area of the
screen is 0 and set that value to 0 if it is not already 0. Complete the actions
in the following table.
Menu button Bottom button
Execute
Action
Pop up menu Side button
Clear String
BK4 OK
Pop up menu Side button
Rename OK
current block
Clear String
BK1 OK
Pop up menu Side button
Binary up OK
counter
DG2040 Data Generator
Front panel
button
Front panel
button
0
ENTER
Front panel
button
1
ENTER
EXECUTE