Table of Contents
Advertisement
Timing Condition Menu
Delay
DG2040 Data Generator
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
This menu lets you set the delay timing parameters of each channel . Figure 3-59
shows the current delay time settings of an example output channel. You can also
see the same image in the SETUP menu. Highlighted lines indicate the pulse
edges currently set. The three nonhighlighted horizontal lines from the top
indicate the highest, 0, and lowest voltage levels that can be set. The two
nonhighlighted vertical lines indicate the signals rising edge at left and falling
edge at right.
If the pulse edges are positioned at the nonhighlighted vertical lines, the positive
delay is currently set to zero. If the pulse edges are positioned left of the
nonhighlighted lines, the output pattern data will be delayed.
Delay
1.00 ns
Figure 3 59: Example delay parameter
The delay can be adjusted in the range of –1.0 ns to 2.0 ns in 10 ps steps for
each output.
Operation.
Do the following to set the output delay.
Bottom button
Pop up menu
Timing Condition
Select the channel for which the rise time is to be set using the knob.
Reference
Side button
Delay
(the delay setting)
3 73
Advertisement
Table of Contents
