Table of Contents
Advertisement
Reference
Set Scope
3 34
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The buttons used to change the groups or bits in the editing range will differ
depending on the display format. Use the up and down arrow buttons for
timing display format, and use the left and right arrow buttons for table and
binary display formats.
H Editing Operation. Use the following editing procedure when the area
enclosed by the area cursor is the object of the editing operation.
Bottom button
Pop up menu
Execute Action
Select the editing operation.
Set the value of the Cursor item in the upper left area of the screen.
Set the value of the Width item in the upper left area of the screen.
Set the groups/bit.
Use the following editing procedure when the area following the cursor is
the object of the editing operation.
Bottom button
Pop up menu
Execute Action
Select the editing operation.
Determine the value of the Cursor item in the upper left area of the screen.
Determine the group/bit.
NOTE. Press the CLEAR MENU button to clear the selected editing operation.
The Set scope item in the Action menu, sets the range of groups or bits that will
be the object of an editing operation executed by the EXECUTE button.
The meaning of a scope element differs depending on the pattern data display
format. For the timing and table display format, an element group is a single
scope element. For the binary display format, a single bit is a single scope
element. Therefore, in timing and table displays, the number of bits that will be
edited may change depending on which groups are within the selected range,
even though the scope does not change as it is moved.
Side button
OK
EXECUTE
Side button
OK
EXECUTE
DG2040 Data Generator
Advertisement
Table of Contents
