Table of Contents
Advertisement
Control Condition
DG2040 Data Generator
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Operation.
Do the following to assign a data bit to the output channel.
Bottom button
Pop up menu
Select the channel to be assigned using the up and down arrow buttons.
NOTE. Note that the settings performed using the Output Channel Assign menu
do not take effect unless the OK button is pressed.
Operation.
Do the following to clear the output channel assignment.
Bottom button
Pop up menu
Output Condition
Select the channel for which the data assignment is to be cleared using the up and down arrow
buttons.
The Control Condition function sets the event control input level and whether
the event control is enabled or disabled.
Sub Menu
Item
Function
Event Level
Sets the event control input threshold level. This level can be set in the
range of -5 V to +5 V.
Enables or disables the event control.
Event
Operation.
Do the following to set the event input level.
Bottom button
Pop up menu
Output Condition
Reference
Side button
Assign
Side button
Assign Condition
Release
Side button
Control Condition
Event Level
(Set the event level)
3 71
Advertisement
Table of Contents
