Table of Contents
Advertisement
Outputting Pattern Data
DG2040 Data Generator
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Output your pattern data using the following steps:
1. Press the START/STOP button on the front panel to start signal output.
2. Press the START/STOP button again to stop output.
Figure 3-14 and 3-15 shows a typical example for operation flow from creating
and editing pattern data to outputting it.
Creating and editing pattern
data and/or sequence
Operations with the Edit menu
and front panel buttons and knob.
Figure 3 14: Operation flow for pattern data output #1
Setting output parameters,
run mode, and trigger
Operations with the Setup menu
and front panel buttons and knob.
Reference
Outputting pattern data
Operations with the
START/STOP, STEP/EVENT
and FORCE TRIGGER buttons
on the front panel. Operations
can also be performed with
external signals coming from
the remote controller or other
equipment.
3 25
Advertisement
Table of Contents
