Setting The Numeric Data Items To Save - YOKOGAWA WT5000 User Manual

8.3

Setting the Numeric Data Items to Save

This section explains operating procedures using the following setup methods.
• Procedure Using the Setup Menu (see chapter 1)
• Procedure Using the Menu Icons (see page iii)
• Procedure Using the Keys (other than SETUP) (see section 1.2 in IM WT5000-03EN)
Procedure Using the Setup Menu
1. Tap the Setup icon
2. Tap Computation/Output tab. A computation and output settings overview screen appears.
Pressing ES
Setting the Save Conditions (Data Save)
Tap Data Save.
3.
An save condition setup screen appears.
Set the save conditions.
1 The numeric data items shown on the screen are saved.
2 The selected numeric data items are saved.
Note
You can also display the computation/output settings overview screen by moving the cursor on the
Computation/Output tab using the arrow keys and then pressing SET.
8-6
► "Saved Numeric Items (Saved Numeric Items)" in the features guide
, or press MENU under SETUP.
C
closes the overview screen.
Select how to set the numeric data items to
be saved.
(Displayed Numeric Items
Select the numeric data items.
You can set this when Item is set to Selected Items.
1 2
, Selected Items )
Numeric data item setup screen
Computation/Output tab
IM WT5000-02EN