Codec Tieline Gateway User Manual page 150

150 Gateway and Gateway 4 Manual v1.2
10. Click Next to select configure Enable Auto Reconnect if required.
11. Next you can either:
i. Click Next to configure rules options.
ii. Click Next Stream if configuring multiple audio stream programs.
12. To configure new stream level rules click the drop-down arrow and select the preferred option
from those available. Click the blue Plus symbol
symbol to remove a rule.
13. After configuring all streams in the multicast server program click Save to store the program
settings, then click Finish.
Important Notes: There is no jitter buffer setting on the server codec because it never
receives audio packets.
14. Configure multicast server and
program. Dial the multicast server program connection first and then connect multicast client
codec programs to begin receiving multicast audio packets.
in a program using the Connections panel, or
panel.
multicast client programs
dial the program manually
to add a new rule and click the Minus
and load all codecs with the appropriate
Select and connect audio streams
using the codec front
© Tieline Research Pty. Ltd. 2021