Configuring Ip Settings - Codec Tieline Gateway User Manual

96 Gateway and Gateway 4 Manual v1.2
3. Click the select the appropriate Sample Rate and Bit Rate for the connection. Note: If only one
sample rate is available this will be automatically selected.
4. Click in the Destination text box and enter the IP address of the destination codec, or click the
Address Book button
5. Click the Connect button to dial.
Monitoring PPMs
See Monitoring PPMs
23.3

Configuring IP Settings

Open the HTML5 Toolbox Web-GUI and click Transport and then click Network to view and
configure Ethernet and VLAN interface settings in the Web-GUI.
Important Note: For assistance with configuration of IPv4 or IPv6 network connections
contact your IT Administrator.
IPv4 versus IPv6
An IP address is a unique address to identify a device on a TCP/IP network. Your codec uses dual
IP protocol stacks to allow your codec to work on both IPv4 and IPv6 networks. Tieline codecs
to select a preconfigured TieLink contact.
for details of how to monitor audio streams using the PPMs panel.
© Tieline Research Pty. Ltd. 2021