Enabling The Cloud Codec Controller; Inverting Input Polarity - Codec Tieline Gateway User Manual

240 Gateway and Gateway 4 Manual v1.2

Enabling the Cloud Codec Controller

24.5
To allow the codec to be configured and managed by Tieline's Cloud Codec Controller over the
public internet it needs to be enabled for CCC management:
1. Press the SETTINGS
2. Navigate to IP Options and press the
3. Select Web-GUI and press the
4. Navigate down to CC Controller and press the
Disabled.
Important Notes:
· Ensure CSRF Protection is disabled in the codec or it will not be able to connect to the
CCC. This setting is [Disabled] by default and is also available in the codec menu via
Settings > WebGUI, and in the Options panel in the HTML5 Toolbox Web-GUI.
· Locally Defined Codecs over a private network do not need to be enabled for CCC
operation. Only codecs that require internet access need to be enabled.
· The CCC needs to continually send and receive data between codecs to update
information displayed. If the CCC is left open on a computer and is not used for more than
4 hours, the Codec Viewer is placed in 'sleep' mode to save data.
24.6

Inverting Input Polarity

The codec supports inverting input polarity.
1. Press the SETTINGS
2. Use the navigation buttons to select Audio Inputs and press the
3. Navigate to the input for which polarity is to be inverted and press the
4. Navigate down to Polarity Inv and press the
Disabled.
button.
button.
button.
button.
button to toggle between Enabled and
button.
button.
button to toggle between Enabled and
© Tieline Research Pty. Ltd. 2021