Codec Tieline Gateway User Manual page 227

7. Reboot the codec via Settings > Reset & Backup > Reboot Codec and press the
button. Note: do not reboot by removing the power cable from the codec.
Download a License File and Install Manually
If the automatic license update fails, or the codec is not connected to the internet, it is possible to
install a previously downloaded license file, or a license file copied to a PC. Save the license to a
PC connected to the codec and use the following procedure to install it:
1. Open the HTML5 Toolbox web-GUI in a browser on your PC.
2. Click Settings in the Menu Bar, then click Licensing to display the Licensing panel.
3. Click Upload a selected file.
4. Navigate to the ".lcf" license file on your PC, then click the Open button to commence
license installation.
5. A Success dialog in the web-GUI Licensing panel confirms installation is complete.
6. Reboot the codec via Settings > Reset & Backup > Reboot Codec and press the
button. Note: do not reboot by removing the power cable from the codec.
7. Clear the web-browser cache and then it may also be necessary to reset factory defaults to
display the new channel assignment. To reset factory defaults select Settings > Reset &
Backup > Restore Factory Defaults. Note: Please take note of network related settings
before restoring factory defaults. Do not restore factory defaults in situations where the
codec can only be accessed remotely. I.e. it is not possible to access the codec front panel
to adjust network settings and restore connectivity.
© Tieline Research Pty. Ltd. 2021
Gateway and Gateway 4 Manual v1.2
227