Reset Factory Default Settings - Codec Tieline Gateway User Manual

If codec 1 always uses the first directory number to call then it will always be routed via Route 1 to
the Answering Audio Stream Connection using Answer Route 1 (configured in step 1). Codec 2
should always use the second directory number and then it will always be routed via Route 2 to the
Answering Audio Stream Connection configured with Answer Route 2.
23.26

Reset Factory Default Settings

There are several options which allow you to restore default settings within the codec. See
Restore Factory Defaults
1. Open the HTML5 Toolbox Web-GUI and click Settings at the top of the screen, then click
Reset / Backup to display the Reset / Backup panel.
2. Click one of the available reset options to adjust codec settings, or reboot the codec. Note:
Hover with the mouse pointer over the Information
reset option.
3. A confirmation dialog appears for each option; click Yes to proceed.
© Tieline Research Pty. Ltd. 2021
for more details on each option.
Gateway and Gateway 4 Manual v1.2
symbol to view a tool-tip for each
195
Reset and