Codec Tieline Gateway User Manual page 58

58 Gateway and Gateway 4 Manual v1.2
3. Navigate to a program and press the
4. Select Load and press the
5. Navigate to the Connections screen and then press the CONNECT
connection.
Edit the IP Address in a Loaded Program
It is not possible to create a program from the codec front panel, however it is possible to edit an IP
address for each audio stream connection.
Important Note: The IP address for an audio stream connection can only be edited when it
is disconnected.
1. Press the HOME
2. Use the navigation buttons to select Connections and press the
3. Select a disconnected stream and press the
4. Press the
then press the Enter button on the onscreen keyboard.
button to select it.
button to load the program.
button to return to the Home screen.
button again to edit the IP address using the keypad or onscreen keyboard,
button.
button.
© Tieline Research Pty. Ltd. 2021
button to make a