Codec Tieline Gateway User Manual page 232

232 Gateway and Gateway 4 Manual v1.2
VLAN ID (VLAN configuration only)
The VLAN ID is encapsulated in IP packets to facilitate routing throughout your network.
1. Press the SETTINGS
2. Use the navigation buttons on the front panel to select Transports and press the
3. Use the down
4. Navigate to Configuration and press the
5. Select Usage and press the
6. Select the mode of operation for this VLAN (e.g. Control & Streaming, Streaming only,
Control Only) and press the
7. Use the down
8. Press the
9. Press the
10. Press the Return
button to confirm the new settings.
VLAN Priority (VLAN configuration only)
VLAN Priority is a prioritization scheme for forwarding data packets throughout Virtual LANs.
1. Press the SETTINGS
2. Use the navigation buttons on the front panel to select Transports and press the
3. Use the down
4. Navigate to Configuration and press the
5. Select Usage and press the
6. Select the mode of operation for this VLAN (e.g. Control & Streaming, Streaming only,
Control Only) and press the
7. Use the down
8. Press the
9. Press the
10. Press the Return
button to confirm the new settings.
VLAN Interface (VLAN configuration only)
This setting applies the VLAN settings to a physical Ethernet port in the codec.
1. Press the SETTINGS
2. Use the navigation buttons on the front panel to select Transports and press the
3. Use the down
4. Navigate to Configuration and press the
5. Select Usage and press the
6. Select the mode of operation for this VLAN (e.g. Control & Streaming, Streaming only,
Control Only) and press the
7. Use the down
8. Press the
9. Press the Return
button to confirm the new settings.
button.
navigation button to select a VLAN interface and press the
button.
button.
navigation button to scroll to VLAN ID.
button to enter a number between 1-4094 inclusive.
button to confirm this setting.
button, then select Yes in the confirmation dialog and press the
button.
navigation button to select a VLAN interface and press the
button.
button.
navigation button to scroll to VLAN Priority.
button to enter a number from 0 to 7 inclusive.
button to confirm this setting.
button, then select Yes in the confirmation dialog and press the
button.
navigation button to select a VLAN interface and press the
button.
button.
navigation button to scroll to Interface.
button to select LAN1 or LAN2, then press the
button, then select Yes in the confirmation dialog and press the
button.
button.
button
button.
© Tieline Research Pty. Ltd. 2021
button.
button.
button.
button.
button.
button.