Configure Multi-Unicast Dialing Programs - Codec Tieline Gateway User Manual

Default Multicast Audio Stream Ports
Multicast Audio
Stream
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
23.13

Configure Multi-Unicast Dialing Programs

Product
Gateway 4
Gateway
8/16
Important Notes: Before you start program configuration please note:
© Tieline Research Pty. Ltd. 2021
4 9002
5 9002
6 9002
TCP Session Port
9002
9002
9002
9002
9002
9002
9002
9002
9002
9002
9002
9002
9002
9002
9002
9002
Feature Notification
Multi- Supports 1 or 2 multi-unicast streams being sent to up to 20
unicasting endpoints
Multi- Supports up to 8 multi-unicast audio streams in Gateway 8 and up
unicasting to 16 multi-unicast streams in Gateway 16 being sent to up to 80
endpoints in total. For example, 4 separate audio streams can
each be streamed to 20 endpoints.
· You cannot edit a program when it is currently loaded in the codec.
Lock a loaded custom program
·
cannot be unloaded by a codec dialing in with a different type of program. For
example, if a multistream program is not locked it will be unloaded by a mono or
stereo call.
· If a codec supports multiple stream programs and the Auto (default) reference level
is selected, the first codec to connect will configure the reference level used for all
subsequent connections. I.e. If a G3 codec connects first then the G3 Audio
Reference Level will be configured for all connections.
· All streams must be dialed initially for a multi-unicast program. Streams can be
disconnected and dialed individually after this.
· Connections are "dial only" for multi-unicast programs.
· Up to 80 streams of 24 bit, 48kHz PCM audio are supported. 24 bit, 96kHz PCM is
not supported for multi-unicast audio streams.
Gateway and Gateway 4 Manual v1.2
9030
9040
9050
9000
9010
9020
9030
9040
9050
9060
9070
9080
9090
9100
9110
9120
9130
9140
9150
or multistream program in a codec to ensure it
135
UDP Audio Port