Setting The Transport Mode; Setting The Total Useful Output Rate; Setting The Luma To Chroma Ratio - evertz 7772MFX-HD Manual

6.6.6. Setting the Transport Mode

Miscellaneous
SDTS
SDI Mode SDI
TS Mode TS

6.6.7. Setting the Total Useful Output Rate

Miscellaneous
RTOL
85 to 165 ASI
85 to 180 SDI

6.6.8. Setting the Luma to Chroma Ratio

Miscellaneous
YCRA
1 to 10
7772MFX-HD JPEG2000 SD & HD Encoder and Decoder
This control sets the transport output mode.
Setting to SDI mode will carry the JPEG2000 information over standard
SDI. In this mode none of the ASI settings are used.
Setting to TS mode will carry the JPEG2000 information over standard
ASI. The default mode is ASI.
This control sets the total rate for the encoded video (luminance and
chrominance).
The default for ASI is 165 Mbits/s.
The default for SDI is 180Mbits/s.
This control allows the user to change the ratio of bitrate allocation
between luma and chroma.
For example, if YCRA is set to 5 (default), the 7772MFX-HD will output
5 times more luma samples than chroma samples. It would be a 5:1
ratio.
The default value is 5.
Revision 1.2
7700 MultiFrame Manual
7772MFX-HD - 21