Input Audio Proc Control Tab; Input Audio Proc Control Tab; Figure 5-4: Vistalink - Input Audio Proc Control Tab - evertz 5782ENC-H264HD-IPASI User Manual

5782ENC-H264HD-IPASI
Professional Contribution H.264 and MPEG-2 Encoder
5.3.

INPUT AUDIO PROC CONTROL TAB

Input Audio Proc Control
Audio Source: If this is disabled, Audio will follow the standard convention on the input. Input Audio
Channels 1-16 go to Encoder Source Channels 1-16 respectively. If this parameter is enabled it
allows the user to select which incoming embedded audio channel goes to which Encoder source
channel. Effectively enabling or disabling an audio router at the source of the encoder.
Encoder Audio Source Select: The drop down menu allows the user to select any embedded audio
channel 1-16 or Mute. When Audio Source is enabled the respected input channel will be routed to the
Encoder audio source channel as defined by the user.
Page - 32
Figure 5-4: VistaLINK

- Input Audio Proc Control Tab

®
Revision 1.0