Table of Contents
Advertisement
7700 MultiFrame Manual
7735CEM Composite Encoder with Monitoring
3.4.
ANALOG MONITORING VIDEO OUTPUT
Standard:
Number of Outputs:
Connector:
Signal Level:
Output Impedance:
Return Loss:
3.5.
ANALOG AUDIO OUTPUTS (-A4 only)
Number of Outputs:
Type:
Connector:
Output Impedance:
Sampling Frequency:
Signal Level:
Frequency Response:
Dynamic range:
THD+N:
Crosstalk:
DC Offset:
SNR:
Inter-Channel Phase Error:
3.6.
AES AUDIO INPUTS AND OUTPUTS (-AES only)
Number of Inputs:
Number of Outputs:
Input Standard:
Output Standard:
Connectors:
Resolution:
Input Sampling Rate:
Output Sampling Rate:
User Bits:
Minimum I/O Delay:
3.7.
GENERAL PURPOSE IN/OUT
Number of Inputs:
Number of Outputs:
Type:
Connector:
Signal Level:
7735CEM-8
Gray background indicate un-implemented or un-tested features
NTSC, SMPTE 170M
PAL, ITU624-4
1
BNC per IEC 169-8
1V nominal
75 Ohm
>35dB to 10MHz
4
Balanced analog audio
Two 6 pin removable terminal strips
66Ω balanced
48kHz
0dBFS => 12 to 25dBu (user settable)
<+/- 0.05dB (20Hz to 20kHz)
24 bits when AES inputs selected,
20 bits when embedded audio selected
<0.001% (>100dB) @ 1kHz, -1dBFS
<-105dB (20Hz to 20kHz)
<+/- 30mV
>110dB "A" Weighting
<+/-1° (20Hz to 20kHz)
2
none on –A4 versions, 2 on –AES versions
SMPTE 276M, single ended synchronous or asynchronous PCM AES
SMPTE 276M, single ended synchronous AES
BNC per IEC 169-8
24 bits when AES inputs selected,
20 bits when embedded audio selected
32kHz to 48 kHz when AES inputs selected,
Synchronous 48kHz when embedded audio selected
Synchronous 48kHz
Transferred to output in a non-real-time, non-block-contiguous manner
on –AES versions
3.5msec on –A4 versions
4.5msec on –AES versions
2 (behavior is assigned via. on-screen menu items)
2 (behavior is programmable via. on-screen menu items)
Opto-isolated, active low with internal pull-ups to +5V
Female DB-9
+5V nominal
Revision 1.1.1
Advertisement
Table of Contents
