Powerhead
Throttle Body and Air Plenum Removal
1.
Remove the four screws securing the throttle body to the plenum.
2.
Remove the 12 screws securing the air plenum to the cylinder block assembly.
a
a
3.
Remove the two screws securing the air plenum to the reed plate assembly.
4.
Remove the 12 screws securing the reed blocks to the reed plate assembly.
Page 4A-32
a
33719
b
a
33720
a
b
a -
Screw (4)
a -
Clamp (3)
b -
Screw (12)
a -
Screw (0.250‑20 x 0.88 in.) (12)
b -
Screw (M4 x 16) (2)
16044
90-8M0050731 MAY 2011