Mercury 200 OptiMax Jet Drive Service Manual page 200

15. Connect the engine harness to the MAP and MAT sensor connectors.
16. Connect the throttle cam link rod and the throttle position sensor link rod.
b
17. Install the vapor separator and secure with three M8 x 35 screws and washers. Tighten the screws to the specified torque.
Description
Vapor separator mounting screws (M8 x 35)
18. Install the fuel high‑pressure fuel outlet hose and fuel return hose.
19. Connect the engine harness to the electric fuel pump connectors.
20. Connect the engine harness to the water sensor connector.
90-8M0050731 MAY 2011
a - MAP sensor
a
16039
a
16036
a - Throttle link rod
b - Throttle position sensor link rod
Nm
16
Direct Fuel Injection
lb‑in. lb‑ft
142
Page 3B-37