Crankshaft And End Cap Bearings - Mercury 200 OptiMax Jet Drive Service Manual

Table of Contents

Advertisement

Powerhead
5.
Clean the crankshaft surfaces with crocus cloth.
6.
Thoroughly clean the crankshaft with a mild solvent and dry with compressed air. Replace the crankshaft if the bearing
surfaces are damaged and cannot be properly cleaned up. Lubricate the surfaces of the crankshaft with light oil to prevent
rust. Do not lubricate the crankshaft ball bearing at this time.
Spin‑drying bearings with compressed air can cause serious injury or death. The bearings can explode, even if spun at very
slow speeds. Do not allow the bearings to spin when drying with compressed air.

Crankshaft and End Cap Bearings

IMPORTANT: When overhauling the powerhead assembly, replace all crankshaft bearings; upper/lower, center main, connecting
rod, and wrist pin bearings. This ensures optimum powerhead performance and longevity.
1.
After cleaning the crankshaft, grasp the outer race of the crankshaft ball bearing installed on the lower end of the crankshaft
and work the race back and forth. There should not be excessive play.
2.
Lubricate the ball bearing with light oil. Rotate the outer bearing race. The bearing should have smooth action and no rust
stains. If the ball bearing sounds or feels rough, or has catches, remove and discard the bearing.
3.
Thoroughly clean and dry the crankshaft center main roller bearings. Lubricate the bearings with 2‑Cycle Premium Outboard
Oil.
Tube Ref No.
2-cycle Premium
14
Outboard Oil
Spin‑drying bearings with compressed air can cause serious injury or death. The bearings can explode, even if spun at very
slow speeds. Do not allow the bearings to spin when drying with compressed air.
IMPORTANT: The crankshaft bearings are matched sets. Mismatching the bearings can result in engine damage. Replace
and install the bearings in matched pairs.
Page 4A-42
a -
Lower crankshaft ball bearing
a
8684
Description
a
a -
Crankshaft journals
b -
Crocus cloth
b
8683
WARNING
!
Where Used
Main bearings
WARNING
!
Part No.
92-858021K01
90-8M0050731 MAY 2011

Advertisement

Table of Contents
loading

Table of Contents