Fuel Rail Specifications - Mercury 200 OptiMax Jet Drive Service Manual

Fuel Rail Specifications

Fuel pressure
Air pressure
Tracker valve spring pressure
Fuel injector ohm resistance
Direct injector ohm resistance
Direct injector color
Fuel rail water cooling
Lubricants, Sealants, Adhesives
Tube Ref No.
Loctite 271 Threadlocker
7
2-cycle Premium Outboard
14
Oil
Special Lubricant 101
34
Loctite 242 Threadlocker
66
2-4-C with Teflon
95
4-Stroke 10W-30 Outboard
110
Oil
Special Tools
Schrader Valve Tee
Digital Pressure Meter
90-8M0050731 MAY 2011
Description
VST mounting screw threads, VST ground wire screw threads
Aids in checking fuel pressure when using a fuel pressure gauge with a screw on
Schrader valve connector
13678
Connects to the fuel system/manifold and can be used in conjunction with
Computer Diagnostic System (CDS)
5786
Fuel System Specifications
Where Used
Air compressor end cap screws
Air compressor end cap screw threads
Air compressor pulley screw threads
Air pressure regulator O-rings
Air hose and fuel hose fitting O-rings
Air compressor cylinder bore
Air compressor end cap O-rings
O-rings on the fuel rail air compressor hose fitting
Fuel pump body seal and fuel pump outlet seal
Fuel pump body seal
Water separator fuel filter seal
Fuel injector O-rings and screw threads
Tracker diaphragm, O-ring, and screw threads
Air pressure regulator screw threads
Fuel pressure regulator diaphragm and O-ring
Fuel pressure regulator screw threads
Direct injector and injector washer
Direct Fuel Injection
751.5 ± 14 kPa (109 ± 2 psi)
655 ± 14 kPa (95 ± 2 psi)
103.5 kPa (15 psi)
1.8 ± 0.1 Ω
1.3 ± 0.3 Ω
Gray
None
22‑849606
91‑892651A01
Part No.
92-809819
92-858021K01
92-802865Q02
92-809821
92-802859A 1
92-858045K01
Page 3B-3