Mercury 200 OptiMax Jet Drive Service Manual page 54

IMPORTANT: Avoid gluing the flexible sealing lips to the tunnel.
a - Glue front portion of grommet
b - Flexible sealing lips to tunnel
Tube Ref No.
Loctite 454 Prism Instant
Adhesive Gel
3. Install the through‑the‑hull fitting bellow assemblies into the tunnel. Tighten securely.
a
a - Bellows
b - Clamp
c - Nut
d - Through‑the‑hull fitting
4. Insert the steering cable through the port side through‑the‑hull fitting and bellows.
5. Route the steering cable through the holes in the port side flange on the side of the pump housing.
90-8M0050731 MAY 2011
a
Description
b c
a
b
b
Where Used
Front portion of grommet
d
Jet Installation
44445
Part No.
5623
Page 1D-11