Mercury 200 OptiMax Jet Drive Service Manual page 207

Direct Fuel Injection
3. Align the fuel pump outlet with the fuel pump outlet seal. Push the fuel pump into the seals.
b
a
4. Install the needle onto the float.
5. Install the float with the needle onto the VST cover. Insert the pin into the float arm. Secure the float pin with the float pin
screw. Tighten the float pin screw to the specified torque.
Description
Float pin screw
6. Lubricate the inside diameter of the fuel pump body seal with Special Lubricant 101.
Tube Ref No.
Special Lubricant 101
34
7. Install the VST cover gasket onto the VST tank.
Page 3B-44
c
a
a
Description
a - Fuel pump electrical harness connector
b - Fuel pump outlet seal
c - Fuel pump outlet
32694
b
c
32685
a - Fuel pump body seal
16052
Where Used
Fuel pump body seal
a - Float
b - Float pin
c - Screw
Nm lb‑in.
1 9
92-802865Q02
90-8M0050731 MAY 2011
lb‑ft
Part No.