Air Compressor Disassembly - Mercury 200 OptiMax Jet Drive Service Manual

Direct Fuel Injection
12. Remove the two screws securing the air compressor to the top of the cylinder block.

Air Compressor Disassembly

1. Use a strap wrench to hold the air compresser pulley and remove the six screws securing the pulley to the air compressor
crankshaft.
2. Remove the screw securing the air compressor temperature sensor. Remove the sensor.
3. Remove the four screws securing the air compressor cylinder head to the cylinder block. Remove the cylinder head.
a
Page 3B-74
a
45928
a -
b
b -
c
c -
32814
a - Screw (M8 x 25, flange) (2)
26410
Air compressor temperature sensor
Screw
Screws securing the air compressor cylinder head
90-8M0050731 MAY 2011