Mercury 200 OptiMax Jet Drive Service Manual page 66

9. Secure the cable nut with the tab washer by bending a tab over the flat of the cable nut.
f
g
Description
Locknut
10. Apply Perfect Seal to the exposed threads.
Tube Ref No.
Perfect Seal
19
11. Loosen the bellows nut and tighten against the cable end adapter.
12. Turn the rudder to port to compress the bellows as much as possible.
13. Pull the bellows over the cable conduit and secure with the bellows clamp.
90-8M0050731 MAY 2011
c
e
d
a
19
Description
a
b
a - Bellows nut
b - Steering arm
c - Bolt
d - Locknut
e - Flat washer
f - Cable nuts
g - Tab washer ‑ bend tab against cable nut
b
44658
Where Used
End threads and the cable conduit end
a - Bellows clamp
b - Bellows nut tight against cable end adapter
5563
Jet Installation
Nm lb‑in.
8 70
5562
Part No.
92-34227Q02
Page 1D-23
lb‑ft