Mercury 200 OptiMax Jet Drive Service Manual page 381

Pump Unit
5. Remove the pinion shaft outer race from the pinion shaft housing using a slide hammer.
Slide Hammer
6. Press a new outer race into the pinion shaft housing using the mandrel.
Bearing Cup Installer
7. Remove the tapered roller bearing from the pinion shaft using the universal puller plate.
8. Press a new tapered roller bearing onto the pinion shaft using the pinion shaft taper roller bearing installer.
Universal Puller Plate
Bearing Installer
Page 5A-32
45269
91‑34569A 1
45271
91‑832018
45272
91‑37241
91‑827983T
90-8M0050731 MAY 2011