Impeller Shaft Removal - Mercury 200 OptiMax Jet Drive Service Manual

9. Press a new ball bearing into the pinion shaft housing using the bearing installer.
Bearing Installer
10. Press the pinion shaft into the pinion housing.
11. Press new seals into the pinion shaft housing, one at a time, using the seal installer. Inner seal faces in, outer seal faces out.
Fill between the seals with Special Lubricant 101.
Bearing Installer
Tube Ref No.
Special Lubricant 101
34

Impeller Shaft Removal

1. Remove the stator, wear ring, and impeller. Refer to Servicing the Stator, Impeller, and Wear Ring.
90-8M0050731 MAY 2011
Description
45273
91‑832016T
45274
a - Seal installer 91‑820552 1
a
45275
91‑820552 1
Where Used
Between shaft seals
Pump Unit
Part No.
92-802865Q02
Page 5A-33