Vst Assembly - Mercury 200 OptiMax Jet Drive Service Manual

10. Remove and discard the fuel pump body seal and the fuel pump outlet seal.
a
IMPORTANT: Do not remove the electric fuel pump harness from the VST cover. If the electric fuel pump harness inside the
VST cover is damaged, the VST cover must be replaced.
11. Cut the cable ties securing the low‑pressure electric fuel pump to the bracket. Remove the low‑pressure fuel pump.
a
b

VST Assembly

1. Install the new fuel pump body seal and the new fuel pump outlet seal into the VST cover. Lubricate the seals with Special
Lubricant 101.
b
a
Tube Ref No.
Special Lubricant 101
34
2. Connect the fuel pump electrical harness to the fuel pump.
90-8M0050731 MAY 2011
b
35779
Description
a - Fuel pump body seal
b - Fuel pump outlet seal
32687
a - Low‑pressure electric fuel pump bracket
b - Cable ties
c - Grommet
c
a - Fuel pump body seal
b - Fuel pump outlet seal
32689
Where Used
Fuel pump body seal and fuel pump outlet seal
Direct Fuel Injection
Part No.
92-802865Q02
Page 3B-43