Mercury 200 OptiMax Jet Drive Service Manual page 293

Powerhead
4. Remove the incoming coolant hose from the port fuel rail.
a
b
5. Remove two screws securing the compressor air hose and remove the hose from the starboard fuel rail.
6. Remove two nuts and coil plate spacers securing the fuel rails.
7. Remove both fuel rails as an assembly.
a
Page 4A-28
a - Air compressor coolant hose
b - Incoming coolant hose
45572
a - Air hose
b - Screw (2)
a
b
45573
a - Nuts
b - Coil plate spacers
b
45574
90-8M0050731 MAY 2011