Examples
cf clk=int
cf mon=fg..2000
Related information
B-4 Specific Command Syntax
To select an external clock, type:
M> cf clk=ext
You can obtain the status of configuration items by typing the item
name without a value. You can also specify multiple configuration
items on the same line. Type:
M> cf mon=fg..08000 rrt=dis clk
Here, we changed to a foreground monitor located at address 8000 hex,
disabled the real-time runs restriction, and ask processor clock source.
Notice that items which are changed do not have status printed; you
could explicitly request the new status by repeating the configuration
item on the command line after the change but without a value. For
example:
R> cf mon=fg..2000 mon
Refer to the cf syntax pages in the User's Reference manual. Also,
refer to chapter 4 of this manual for complete information about each
configuration item.