Viewing Connection Information - HP StorageWorks Modular Smart Array 1000 cs User Manual

Using the CLI

Viewing connection information

The following command displays the World Wide Names of each Host Bus
Adapter (HBA) attached to the MSA. If connections between the HBAs and the
MSA have been given user-defined names, these names are also displayed.
Note:
are recognized and defined.
Basic command
Example command
Command options
Example CLI response
30
Use the
SHOW CONNECTIONS
SHOW CONNECTIONS
CLI> SHOW CONNECTIONS
—the name of a specific connection to display.
CONNECTION NAME
—the WWPN of a specific connection to display.
WWPN
Connection Name: abc
Host WWNN = 11111111-11111111
Host WWPN = 22222222-22222222
Profile Name = Default
Unit Offset = 0
Controller 1 Port 1 Status = Online
Controller 2 Port 1 Status = Online
Connection Name: <unknown>
Host WWNN = 33333333-33333333
Host WWPN = 44444444-44444444
Profile Name = Default
Unit Offset = 0
Controller 1 Port 1 Status = Online
Controller 2 Port 1 Status = Online
Modular Smart Array 1000/1500 cs Command Line Interface User Guide
command to verify that all connections to the MSA