Executing Blocks - HEIDENHAIN ND 7000 Operating Instructions Manual

Information for the Operator | MDI mode
2.3

Executing blocks

You can execute a positioning function or select a machining pattern and execute
this block.
If enabling signals are missing, the running program is halted and the
drives of the machine are stopped.
Further information: Manufacturer's documentation for the machine
Executing blocks
HEIDENHAIN | ND 7000 | Operating Instructions Drilling with radial drilling machines | 08/2023
Tap Create on the status bar
A new block is displayed
or
The last programmed MDI block is loaded along with all of its
parameters.
Select the desired block type from the Block type drop-down
list
Based on the block type, define the relevant parameters
To load the current axis position, tap Actual position capture
in the appropriate input fields
Confirm each input with RET
To execute the block, tap END
The positioning aid is displayed.
If the simulation window is activated, the current block is
visualized.
Depending on the block, user intervention may be required; the
wizard will display the relevant instructions.
Follow the instructions in the wizard
In multi-step blocks, such as machining patterns, tap Next to
jump to the next instruction
III
235