Connecting With Control Unit - Mitsubishi Electric M800VW Series Connection And Set Up Manual

Hide thumbs Also See for M800VW Series:

Table of Contents

M800VW/M80VW Series Connection and Setup Manual

12 Connection of Laser I/F Unit

12.4 Connecting with Control Unit

RIO1 or RIO2

(1) Connect the J210 cable to the RIO1 or RIO2 connector of the control unit.

Check the connector position with the actual machine.

(2) Laser I/F unit occupies 1 ch of the remote I/O. The remote I/O unit cannot be connected between the control unit and the

laser I/F unit.

Remote I/O 1ch

Occupies 1 ch

IB-1501612-C