Inputting The Data From A Personal Computer - Mitsubishi Electric M800VW Series Connection And Set Up Manual

M800VW/M80VW Series Connection and Setup Manual
32 Setting the Handy Terminal

32.1 Inputting the Data from a Personal Computer

It is necessary to customize the display part composition, the key input, the communication condition with NC, etc. to connect
the handy terminal (HG1T-SB12UH-MK1346-Lx).
Create the customized data with "NC Designer HT" and download it to the handy terminal.
There are two methods to input customized data for the handy terminal.
 Connecting a personal computer and the handy terminal and inputting the data from "NC Designer HT"
 Connecting NC and the handy terminal and inputting the data from an SD card
32.1 Inputting the Data from a Personal Computer
Create a project data (*.p1t), which is handled as customized data, with the customized data creation tool "NC Designer HT".
Then download it to the handy terminal.
(1) Start the customized data creation tool "NC Designer HT" to create the project data (*.p1t).
(2) Connect a personal computer and the handy terminal via serial RS-232C.
(3) Select [Online] - [Communication setting] from the menu of "NC Designer HT" and confirm the communication condition is
as follows.
Port: Personal computer port
Transmission: 19200 [bps]
Data length: 8 [bit]
Stop bit: 2
Parity: None
IB-1501612-C 546