Mitsubishi Electric M800VW Series Connection And Set Up Manual page 101

Hide thumbs Also See for M800VW Series:

Table of Contents

M800VW/M80VW Series Connection and Setup Manual

4 General Specifications

4.7 Personal Computer Unit

(14) DCIN (24 VDC input)

Connector: 2-178288-3

Contact: 1-175218-5

Manufacturer: TE Connectivity

[Power supply specifications]

Consider the following selection items when selecting the stabilized power supply (supplied by the machine tool

manufacturer). Use a power supply that complies with CE Marking or that follows the safety standards given below.

Voltage fluctuation ±5% or less of 24 VDC

Ripple noise

Power capacity

Output holding time

Overcurrent protection

Safety standards:

Noise terminal voltage:

High harmonics current restrictions:

 24 VDC voltage may drop instantaneously due to rush current at the beginning of 24 V power supply to the personal com-

The level of voltage drop depends on the capacity of the power supply. Do not share the power supply with the devices that

have alarms to warn the voltage drop.

Using a stabilized power supply without overcurrent protection may cause the unit's failure due to miswiring of 24 V.

IB-1501612-C

200 mV (P-P)

Calculate the current value as a reference of maximum current consumption for the unit which uses the power

UL1950, CSA C22.2 No. 234 approved, IEC950 compliant

FCC Class A, VCCI Class A

IEC61000-3-2

Standard setting