Do you have a question about the FX-10DU-E and is the answer not in the manual?
Questions and answers
Steven Outlaw
June 11, 2025
I need to know the basics of how to enter in vacuum and exposure times to a brand new (remade) control panel "with buttons, not touch screen" type of interface.
Thank you.
1 comments:
Mr. Anderson
August 18, 2025
To enter vacuum and exposure times on a Mitsubishi Electric FX-10DU-E control panel:
1. Push [SET] to display a cursor under the first value to be changed. 2. If the desired value is not selected, push [SET] again to move the cursor. 3. Use the numeric keys to type the new value. 4. Push [ENTER] to confirm the entry. 5. If an incorrect value is entered, push [CLEAR] to cancel and try again. 6. If the value exceeds the display capacity, the message "OUT OF RANGE" will appear. Push [CLEAR] and re-enter a valid value.
Need help?
Do you have a question about the FX-10DU-E and is the answer not in the manual?
Questions and answers
I need to know the basics of how to enter in vacuum and exposure times to a brand new (remade) control panel "with buttons, not touch screen" type of interface. Thank you.
To enter vacuum and exposure times on a Mitsubishi Electric FX-10DU-E control panel:
1. Push [SET] to display a cursor under the first value to be changed.
2. If the desired value is not selected, push [SET] again to move the cursor.
3. Use the numeric keys to type the new value.
4. Push [ENTER] to confirm the entry.
5. If an incorrect value is entered, push [CLEAR] to cancel and try again.
6. If the value exceeds the display capacity, the message "OUT OF RANGE" will appear. Push [CLEAR] and re-enter a valid value.
This answer is automatically generated