Table of Contents
Advertisement
M800VW/M80VW Series Connection and Setup Manual
42 Appendix 2: Protection Setting
42.4 Changing the Password
42.4 Changing the Password
Operation Methods
(Example) Change the password of operation level 4 from "OLDPASS" to "NEWPASS"
Press the menu [Change pasword].
(1)
(2)
Use [ ↑ ] or [ ↓ ] key to move the cursor to the opera-
tion level where you want to change the password.
(Operation level 4 in this case)
Enter the current password for the operation level of
(3)
the cursor position.
(Example) OLDPASS [INPUT]
Enter a new password.
(4)
(Example) NEWPASS [INPUT]
Enter the new password again.
(5)
(Example) NEWPASS [INPUT]
Note
(1) Set a password with one-byte alphanumeric characters between 3 and 8 letters (only capital letters are acceptable for
alphabet). In addition, "UPARA" is unavailable to set as the password.
(2) Changing the password is available only for the lower operation level than the current one.
IB-1501612-C
The menu [Change pasword] is highlighted.
The operation message "Enter the current password." is
displayed.
The cursor appears on the current operation level.
The operation message "Enter the current password." is
displayed.
<When the password is correct>
The operation message "Enter a new password." is dis-
played.
<When the password is incorrect>
The operation message "Your password is incorrect." is
displayed, and then the operation returns to the process
(2).
<When the acceptable password is entered>
The operation message "Type in the new password again."
is displayed.
<When the unacceptable password is entered>
The operation message "Set a password that meets the
condition." is displayed, and then the operation returns to
the process (4).
<When the re-entered password is equal to the first one>
The operation message "Password changed" is displayed,
and the highlighted menu option [Change password] re-
turns to normal.
<When the re-entered password is not equal to the first
one>
The operation message "Your password is incorrect." is
displayed, and then the operation returns to the process
(4).
630
Advertisement
Table of Contents
